Thanks Dom --- and yes I suspect I need a spring -- going to try and take it apart in the next day or two. Cheers, Doug On Wed, May 22, 2013 at 3:08 PM, Dominic Provini Jr. <dprovinijr@ha-pa.com>wrote: > Doug, > Do you just need a spring? The spring just falls out of the bottom bar > once you take off the crush washer/nut and pull that pin out . I may > have an extra spring. I too replaced my entire H bar assembly. > > Dom > > > > -----Original Message----- > From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf > Of Doug Alcock > Sent: Wednesday, May 22, 2013 2:54 PM > To: vanagon@GERRY.VANAGON.COM > Subject: Vanagon poptop spring question > > Hi gang --- I assume you're all familiar with the funny hinge/spring > thing that holds up the vanagon Westy poptop. I know there's a spring > inside it and one side of mine appears to be dead. Does anyone know if > this can be fixed and if so how??? I've already replaced assembly once > with a used one from a wrecker -- lasted about 7 years. Or if anyone has > a lead on a good > used assembly......... So, can it be fixed or where can I find a > replacement?? > > Thanks to all, > Doug > > -- > http://www.dougalcock.com >
|
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.