Date:         Tue, 28 May 2013 09:22:28 -0700
Reply-To:     neil n <musomuso@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         neil n <musomuso@GMAIL.COM>
Subject:      Re: More FREE Vanagon Stuff. Vancouver BC, Canada
Comments: To: JordanVw@aol.com
In-Reply-To:  <13e509.499f74b5.3ed5c5a9@aol.com>
Content-Type: text/plain; charset=ISO-8859-1

Thanks for that info.

I figured it might be of some value. Regardless, the only interest in
it has been for the headrests.

I got it and the clamshell for "free" out of the transporter I parted
out   (yes, yes, I know   ;)     )   so am passing that along.

I'd prefer the seat be used as-is in a Doka or whatever, but I really
need to downsize so it's gotta move.

Wasn't sure if it could "easily" be made to fit a standard Vanagon!
Useful for me and others to know!

Neil.





On Tue, May 28, 2013 at 1:32 AM,  <JordanVw@aol.com> wrote:

> In a message dated 5/27/2013 6:38:19 P.M. Eastern Daylight Time,
> musomuso@GMAIL.COM writes:
>
> Transporter Bench seat, black, somewhat stained. Save-able?

>
> pics here: https://picasaweb.google.com/musomuso/FreeVanagonStuff
>
>
> just a fyi...those 2 person front seats are highly sought after..they were
> also used in single and doublecabs.  i sold one for $150. and it looked
> worse than yours :)
>
> of you fab a seatback support they will fit any vanagon, even a westy!!...



--
Neil n

Blog: tubaneil.blogspot.ca

'88 Westy http://tinyurl.com/c8rlw6p

'81 VanaJetta 2.0 "Jaco"  http://tubaneil.googlepages.com/

Vanagon VAG Gas inline-VR Engine Swap Group:

http://tinyurl.com/d7gd5ej