Vanagon EuroVan
Previous (more recent) messageNext (less recent) messagePrevious (more recent) in topicNext (less recent) in topicPrevious (more recent) by same authorNext (less recent) by same authorPrevious page (June 2013, week 1)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:   Wed, 5 Jun 2013 16:08:57 -0700
Reply-To:   Stuart MacMillan <stuartmacm@GMAIL.COM>
Sender:   Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:   Stuart MacMillan <stuartmacm@GMAIL.COM>
Subject:   Re: Oil analysis on worn engine
Comments:   To: Tom Hargrave <thargrav@hiwaay.net>
In-Reply-To:   <010b01ce623e$bcd652e0$3682f8a0$@hiwaay.net>
Content-Type:   text/plain; charset="us-ascii"

It's weird. New NAPA Gold air filter installed with this oil change, and it all looks fine on the engine side. No way of knowing what went on with this rig before I bought it a year ago, it was basically abandoned, but it did spend a lot of time in dusty eastern Oregon. Could be caked dust in the sump!

Got those 2000 miles last summer and I'm pushing for another lucky summer!

Stuart

-----Original Message----- From: Tom Hargrave [mailto:thargrav@hiwaay.net] Sent: Wednesday, June 05, 2013 3:48 PM To: 'Stuart MacMillan'; vanagon@GERRY.VANAGON.COM Subject: RE: Oil analysis on worn engine

The silicon tells me that you have dirty air leaking past the air filter. The last time I saw silicon numbers this high was when I installed K&N air filters in my two Mercedes 300E's. I immediately threw them out, installed pleated paper air filters and changed the oil. The numbers were back down to normal in the next analysis & the silicon levels stayed low during subsequent oil analysis. I will NEVER install a K&N air filter in a car again because of this.

The high levels of iron & aluminum tells me that the cylinder walls & piston skirts are wearing fast. Could this be related to the dirty air being drawn into the engine?

The high boron & sodium are coming from your antifreeze - not a good sign for your head gaskets.

Thanks, Tom Hargrave www.kegkits.com www.stir-plate.com www.towercooler.com www.grow-sun.com www.raspberryproject.com

-----Original Message----- From: Vanagon Mailing List [mailto:vanagon@GERRY.VANAGON.COM] On Behalf Of Stuart MacMillan Sent: Wednesday, June 5, 2013 4:51 PM To: vanagon@GERRY.VANAGON.COM Subject: Oil analysis on worn engine

Just in case anyone is interested in what the oil looks like in a poorly maintained '85 Westy with 140k miles after 2000 miles: http://imgur.com/HLX3OUK

Good news is no coolant (probably)! Bad news-lots of iron, lead and aluminum. No surprise with the low compression in two cylinders. Iron could be from a worn cam and lifters as well as cylinders and rings. I'll install an oil pressure gauge next to see how bad the bearings are. Still hope to get 3000 miles out of it this summer.

Stuart


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.