Date:         Mon, 3 Jun 2013 23:39:43 -0500
Reply-To:     jpalmer@MYMTS.NET
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Jeff Palmer <jpalmer@MYMTS.NET>
Subject:      Re: Tip for slow cranking
Comments: To: Alistair Bell <albell@SHAW.CA>
In-Reply-To:  <D6A79734-DD5A-4991-9D6E-A554DA0C88F2@shaw.ca>
Content-Type: text/plain; charset="us-ascii"

Not quite the same situation bit I have fast cranking when hot but won't catch. Helps if I let the fuel pump run for the full two seconds or whatever it is. Fuel pressure problem?

Jeff
85 Westfalia 

Sent from my iPad

On 2013-06-03, at 10:05 PM, "Alistair Bell" <albell@SHAW.CA> wrote:

> Those hot feeds to fuse box often come off in the process when I pull the panel (which I seem to do frequently for various reasons).
> 
> So they get worked in my van, but I need to pinch the spades to tighten them up.
> 
> alistair
> 
> 
> On 2013-06-03, at 7:52 PM, Jim Akiba wrote:
> 
>> Seen this a few times, haven't seen anyone else mention it yet, so I
>> thought I'd share.
>> 
>> http://www.youtube.com/watch?v=lt01CSEMMSI
>> 
>> Jim Akiba