Date:         Mon, 17 Jun 2013 11:39:35 -0400
Reply-To:     Tom Buese <tantonbz@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Tom Buese <tantonbz@GMAIL.COM>
Subject:      Re: rear speaker wires, '83 Westy
Comments: To: David Moyal <moyald@gmail.com>
In-Reply-To:  <CAEPrwb-7k3WOczDGw28GNm_uYD++EhYDTtJFUqFi4qAqxVbOwQ@mail.gmail.com>
Content-Type: text/plain; charset=ISO-8859-1

When I added new wiring to my Westy rear speakers, the path was from the
radio to the "A" pillar then along the frame rail(?) above the sliding door
to the headbanger cabinet above the bed-fairly easy to open up those panels
& run new wires to both speakers from that side, IIRC.  If you don't have a
westy, then never mind!

YMMV,

Mr. BZ


On Mon, Jun 17, 2013 at 10:16 AM, David Moyal <moyald@gmail.com> wrote:

> Thanks for the idea. Now, the wires won't move in whatever chase they're
> in, so fishing's not an option. But the bass are biting up at the
> lake...David
>
> On Mon, Jun 17, 2013 at 4:03 AM, Harry Hoffman <hhoffman@ip-solutions.net
> >wrote:
>
> > Dave,
> > Would it be possible to use the old wires to fish a new set into their
> > place?
> > I've done this in other applications but never tried with speaker wires
> in
> > the van.
> > I'm sure someone on the list can weigh in on it.
> >
> > Cheers,
> > Harry
> >
> > David Moyal <moyald@GMAIL.COM> wrote:
> >
> > >My '83 Westy has a short in one of the rear speaker wires. I want to
> > >replace both. Can anyone describe the routing for these wires, so I can
> > >minimize interior disassembly? Thx much, David
> >
>



--
Tom Buese