Make sure you get the highest quality parts possible. So much junk out there these days, you don't want to do this work twice. -----Original Message----- From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of Jim Felder Sent: Friday, June 28, 2013 7:30 AM To: vanagon@GERRY.VANAGON.COM Subject: Pressing control arm bushings Craig Cowan was asking about upper control arm bushings and got some good answers. I am about to replace every bushing in my entire suspension, front and rear, and was wondering about the other bushings that do have to be pressed out and in. Is this something that can be done with a large vise or some allthread with nuts and washers, or do I need to send the lower fronts and rears out to a shop? Thanks, Jim |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.