Date:         Thu, 27 Jun 2013 16:46:46 -0400
Reply-To:     "kenneth wilford (Van-Again)" <kenwilfy@COMCAST.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         "kenneth wilford (Van-Again)" <kenwilfy@COMCAST.NET>
Subject:      Re: Upper Control arm compatibility
Comments: To: Craig Cowan <phishman068@gmail.com>
In-Reply-To:  <C0270E33-4F8D-463E-8B97-ED1E56F92C17@gmail.com>
Content-Type: text/plain; charset=ISO-8859-1

Craig if you are in a bind I can send you a set of upper control arms off
of a 91 I parted out.  They are both pretty nice shape with the bushings in
them.  The van had 100k miles on it and was garage kept (got Tboned or it
would still be floating down the road).  I can just send them to you for
the price of shipping if that will help you out.

Ken Wilford
John 3:16
www.vanagain.com


On Thu, Jun 27, 2013 at 2:32 PM, <phishman068@gmail.com> wrote:

> I found mine won't budge. Seized solid unless I loosten the bolt a bunch.
> Thus I need upper control arm bushings, which aren't in the
> dwindled/depleted budget for the winter beater bus. Even if I could afford
> them, I don't know anyone around here with a press.
> So, I have an opportunity to buy some in good shape that should be a
> simple swap over and it looks like that's the route I'm going to go.
> Used ball joints as well.
> : /
>
> I got into prettying this bus up and so far have replaced 10 seperate
> pieces of metal and spent hundreds on supplies, metal, etc. it was supposed
> to be a two day job and now I'm 65 hours in and out of funds. I've got the
> body almost done and its going to be sick, but finding a bunch of stuff bad
> on the suspension was unpleasant and unwarranted.
>
> The joys of bus ownership ehh?
> : )
> Thanks guys.
>
> -craig
>
>
> On Jun 27, 2013, at 1:26 PM, "kenneth wilford (Van-Again)" <
> kenwilfy@comcast.net> wrote:
>
> They should be the same.  I have a nice set off a 91 if you are in a bind.
>
> Ken
>
>
> On Thu, Jun 27, 2013 at 11:58 AM, Craig Cowan <phishman068@gmail.com>wrote:
>
>> Are all upper control arms the same?
>> I need some for my 90gl and have access to some off an 84/85. Are they
>> compatible? The same?
>> Thanks!
>>
>> -craig
>
>
>
>
> --
> Thanks,
> Ken Wilford
> John 3:16
> www.vanagain.com
>
>


--
Thanks,
Ken Wilford
John 3:16
www.vanagain.com