At 10:10 PM 7/4/2013, jpalmer@mymts.net wrote: >Cleaned out the fresh water tank with a bit of bleach and ran >through the lines. Turned on the pump to flush. So far so good. >Turned on the pump again and it must have picked something up? Runs >but no output. New pump two years ago. Argh! Where is the most >likely plug? In the tank or at the pump? If it's the newer kind with a little centrifugal pump in the tank it may just be air bound. Suck on the faucet while the pump is running, see what happens. I've never seen the external pump, dunno how they work. Yrs, d |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.