That's a great idea. I usually put the vice grips on the flare nut b/c as others have mentioned, line wrenches don't work, they just strip. Will have to try this technique next time. -----Original Message----- From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of Gregory Smith Sent: Wednesday, July 10, 2013 11:20 AM To: vanagon@GERRY.VANAGON.COM Subject: Re: 11mm brake line wrench A trick I often use with brake line nut wrenches is to place the proper wrench on the nut, then clamp the wrench with a vice-grip type of locking pliers. This helps keep the line nut wrench from spreading under extreme force. Really helps when working on 35 y.o. Fiats. And Vanagons. |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.