The only thing you need is a good 1/2" drive 50-250 lb torque wrench and socket, like this one: http://www.sears.com/craftsman-1-2-in-dr-digi-click-torque-wrench/p-00913919 000P?prdNo=5&blockNo=5&blockType=G5 Rent one if you don't want to own it, or maybe your FLAPS has one they will loan you. These are your brakes, don't mess around. And get sockets for the wheel nuts and studs and torque them to spec too! My Bentley is not handy or I'd look up the torque specs for you. Stuart
-----Original Message----- From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of Tom Carchrae Sent: Thursday, July 11, 2013 12:16 PM To: vanagon@GERRY.VANAGON.COM Subject: Re: burning smell - brakes or tire? I got the calliper bolts off - I needed to borrow a breaker bar and then stand on the end of it. And yes, I do need a better socket set. I did notice that the bolts (19mm) seemed nearly the same size as the wheel bolts - and considered using the tire tool, but it was a small loose and I didn't want it to fly off or round them. When I reattach these bolts, aside from a good amount of torque, do you apply anything else to ensure they don't vibrate loose? |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.