Date:         Sat, 13 Jul 2013 16:58:55 -0500
Reply-To:     Alan Felder <dieseldoofus@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Alan Felder <dieseldoofus@GMAIL.COM>
Subject:      Re: Shift Linkage Woes -- 1984 Westy
Comments: To: b1biker@aol.com
In-Reply-To:  <8D04DFE427B9202-B70-8988C@webmail-d164.sysops.aol.com>
Content-Type: text/plain; charset=ISO-8859-1

Sounds like the problem is the ball/spring assembly on the shift
lever.  These are still available from list vendors.  It's an easy
job.

While you are looking at the shift mechanism, check the bushings all
the way back.  Grease, refurbish/replace...

Then read the Bentley about adjustments - that will be crucial after
everything is back together.

On 7/13/13, Gary Meier <b1biker@aol.com> wrote:
> I'm working on a friends 84 Westy. The shifting is vague and you don't need
> to depress the shift lever to engage reverse. It seems like there is
> excessive movement in the front portion of the linkage. I found a collection
> of broken plastic bits in the spare tire but can't determine where they came
> from. Any advice, assistance would be greatly appreciated.
> Gary Meier
>


--


Alan Felder
Austin TX
82 Diesel Westy

Bitcoin Research Fund
Donate to: 1DwB7ad9avys3U1YzcLbQwfB27fAzbzBEN