Date:         Tue, 9 Jul 2013 18:55:21 -0600
Reply-To:     ralph meyermann <ralphmeyermann@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         ralph meyermann <ralphmeyermann@GMAIL.COM>
Subject:      AAZ swap progress
Content-Type: text/plain; charset=ISO-8859-1

Hi Volks!  I've been hard at it doing this swap and taking care of other
things that needed attention. So far it has been getting spacers to lower
engine and tranny 1" for engine lid clearance, New stainless coolant lines,
fuel tank and sending unit, all shift linkage, clutch plate pressure plate
and having flywheel surfaced, lubing throttle pedal assembly and cable, oil
pump, oil seals and gaskets,and dropped off crankshaft to have timing gear
updated tdi style  due to suggestions from vwdielselfans to prevent failure
and seeing the original key and keyway set up I can understand why. Finally
a new set of bulli bar bumpers from Ken @ Vanagain to top it off. It all
should be coming together in the next week for fabrication of new intake
and exhaust system. It seems nothing is bolt it in and go. Finally the end
is in sight!!
Velma 82 na diesel westy