Date:         Tue, 9 Jul 2013 18:48:15 -0700
Reply-To:     neil n <musomuso@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         neil n <musomuso@GMAIL.COM>
Subject:      Westy Electrical and Water Tank Routing
Content-Type: text/plain; charset=ISO-8859-1

Hi all.

Finally getting the cabinetry etc. back into my 1988 Westy.

A double check please.

Does the 110 VAC Romex/Loomex go behind the interior panel? Or is it
routed along with the water tank hose through the cutouts at bottom
rear of rear cabinet?

I think the 110 goes behind the panel as my '81 is this way but I've
done so much work on that bus (some as a total newb) I could've gotten
that wrong!

Neil.

--
Neil n

Blog: tubaneil.blogspot.ca

'88 Westy http://tinyurl.com/c8rlw6p

'81 VanaJetta 2.0 "Jaco"  http://tubaneil.googlepages.com/

Vanagon VAG Gas inline-VR Engine Swap Group:

http://tinyurl.com/d7gd5ej

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.