Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (July 2013, week 2)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Wed, 10 Jul 2013 10:53:55 -0400
Reply-To:     Stuart Fedak <ve3smf@YAHOO.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Stuart Fedak <ve3smf@YAHOO.COM>
Subject:      Re: 11mm brake line wrench
Comments: To: Mike B <mbucchino@CHARTER.NET>
In-Reply-To:  <51DD6E7C.7010907@charter.net>
Content-Type: text/plain; charset=us-ascii

Just for the record, this is a site with information on the cunifer brake hose and fittings.

http://www.fedhillusa.com/

http://store.fedhillusa.com/316475mmtubingandnuts.aspx

This is very popular with folks that restore older vehicles. You can sometimes order some from your local parts jobber.

Cheers!

Stuart

Sent from my electronic umbilicus

On 2013-07-10, at 10:23 AM, Mike B <mbucchino@CHARTER.NET> wrote:

> > I recently replaced EVERY line on my '87 Westy, as they looked like > they came from the Titanic. Hard lines, flex lines, line clips and all. > I use cunifer (copper-nickel-ferrous) tubing and new flarenuts. NO > REUSED OLD JUNK to trust my families live on! After all, it's only your > life that may be saved by your brakes, right? Maybe even someone > elses? I have a complete list with lengths, if anyone is interested, > as i took the extra time to not only DO IT RIGHT, but to take notes so > others might benefit from my labor in this task. > > Mike B. > > > On 7/10/2013 1:40 AM, Dennis Haynes wrote: >> The wrench you need is often known as a "heat wrench". Yes a torch! A good oxy-acetylene torch carefully used will get these fitting a part easily. When heating the hose connections plan to replace them just in case. >> >> Dennis >> >> -----Original Message----- >> From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of Mike Riley >> Sent: Wednesday, July 10, 2013 1:04 AM >> To: vanagon@GERRY.VANAGON.COM >> Subject: 11mm brake line wrench >> >> I guess I need to clarify things a bit. I have several sets of flare nut wrenches and get no joy from them. The problem is not twisting the lines but breaking the nut loose without rounding it off. Tried several sets and all the same, they spring open when subjected to the force needed to break the nut loose. The nuts have had a bath in penitrating oil to no avail. Sometimes they warp the nut instead of rounding it off. I have had sucess with carefully using vice grips but don't like it as it is very easy to mangle the nut. need some kind of wrench that closes the gap. >> mike


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.