I recently installed a "GoWesty" stainless muffler and brackets. So far very nice! It sounds like it is ales restrictive design and it saves some weight. It also uses the original flange design on both sides so you can replace it with the old system in place. Dennis
-----Original Message----- From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of David M Sent: Saturday, July 13, 2013 2:10 PM To: vanagon@GERRY.VANAGON.COM Subject: Mufflers and OXS sensor I'm just researching these as it seems I will need both. What is the difference between the 15725 and 15735 oxygen sensors? Can I use either in a 1987 2.1L Vanagon. Is there a preferred muffler brand? I see Bosal, Ansa, Dansk, Ernst and Walker. All seem to be around $125-$150. What else will I need to replace the cat and muffler? It looks like the muffler hangers cost as much as the muffler. Do list members still get a slight discount from Bus Depot? Thanks.
-David ('87 Wolfsburg)
________________________________ |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.