Ground to the body near the lights. Run the power wire to the left side behind the left headlight bucket and sneak in with one of the harnesses under the grommet to get the wire inside. Use a switch and relay, wire up so fogs only operate with low beams. Consider current capacity all the way from the alternator, not just the battery. Dennis -----Original Message----- From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of Jim Felder Sent: Tuesday, July 16, 2013 7:27 PM To: vanagon@GERRY.VANAGON.COM Subject: Best way from bumper mounted lights to under dash? My next step in installing bumper mounted fog lights is to get them grounded and get wiring into the under-dash area. Who has done this who has found a good way to do it? Thanks, Jim |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.