I haven't looked at a vgon suspension in the book or my own van in a while, but my guess is something is up with the upper control arms. Is it possible to switch them left to right? If they are offset that would do it.
-----Original Message----- From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of Craig Cowan Sent: Monday, July 15, 2013 6:07 PM To: vanagon@GERRY.VANAGON.COM Subject: Running out of castor adjustment So I'm at the shop and they can't seem to get my castor set. The nuts are almost all the way off the radius rods and still it's off by a bit. The bushings are new, and they're torquing the hell out of the inner nuts to get it close. Any suggestions? 90 gl 2wd. -craig |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.