Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (July 2013, week 3)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Sat, 20 Jul 2013 12:49:27 -0700
Reply-To:     neil n <musomuso@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         neil n <musomuso@GMAIL.COM>
Subject:      Re: Suggested Minimum Tools To Carry
Comments: To: Stuart Fedak VE3SMF <ve3smf@yahoo.com>
In-Reply-To:  <1374347239.72733.YahooMailNeo@web162703.mail.bf1.yahoo.com>
Content-Type: text/plain; charset=ISO-8859-1

Something I should have clarified: my list will be somewhat different as I have a different engine (Jetta 2.0 gas). Consider what type of driving you do, and where.

I carry parts that:

save me from a "no start" (ign. switch, rotor/cap, longest ign. wire, wire from coil to cap, etc.) are hard to find but relatively small are small and would provide "convenience" (i.e. alternator brush assembly. Thank you Loren for that hint)

Like I at least carry parts that would get me out of the bush if a no start happened. A bike can also be very handy. ;)

This applies to any engine IMO.

I try to limit spares to engine related parts and try not to carry bulky items. Like I used to carry a starter, but with a manual transmission, a bump start usually works. That said, bump starting on a forestry service road might be challenging. Alternators can be found w/o too much hassle and AFAIK and if it's not the brush at fault, one can usually limp to the next town.

A related irony. Part of the reason I installed a Jetta engine was to provide me with easier access to common parts. On my recent road trip, I neglected to bring a few things. One being the serpentine accessory belt that drives alt. coolant pump. On my swap, this ended up being a challenge to find! (I'm running a belt on what some call an "AC delete" setup. I had found one easily in Bend OR at an import parts shop but not so easy to find elsewhere). Thankfully O'Reilly auto parts let me try out a few belt sizes.

Carry new spare belts. ;)

Neil.

On Sat, Jul 20, 2013 at 12:07 PM, Stuart Fedak VE3SMF <ve3smf@yahoo.com> wrote: > Neil, > Would you be able to provide a list of suggested spare parts, gaskets, > seals, bolts, gasket seal, hose, injectors, etc... that you have found > useful Some of the items in your pictures I can recognise, but others, I > have not had the pleasure of being introduced to.

-- Neil n

Blog: tubaneil.blogspot.ca

'88 Westy http://tinyurl.com/c8rlw6p

'81 VanaJetta 2.0 "Jaco" http://tubaneil.googlepages.com/

Vanagon VAG Gas inline-VR Engine Swap Group:

http://tinyurl.com/d7gd5ej


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.