Date:         Mon, 15 Jul 2013 09:07:32 -0400
Reply-To:     Dennis Haynes <d23haynes57@HOTMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Dennis Haynes <d23haynes57@HOTMAIL.COM>
Subject:      Re: Mufflers and OXS sensor
Comments: To: David M <covrambles@YAHOO.COM>
In-Reply-To:  <1373739008.74404.YahooMailNeo@web160105.mail.bf1.yahoo.com>
Content-Type: text/plain; charset="US-ASCII"

I recently installed a "GoWesty" stainless muffler and brackets. So far very
nice! It sounds like it is ales restrictive design and it saves some weight.
It also uses the original flange design on both sides so you can replace it
with the old system in place.

Dennis


-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of
David M
Sent: Saturday, July 13, 2013 2:10 PM
To: vanagon@GERRY.VANAGON.COM
Subject: Mufflers and OXS sensor

I'm just researching these as it seems I will need both.

What is the difference between the 15725 and 15735 oxygen sensors? Can I use
either in a 1987 2.1L Vanagon.
Is there a preferred muffler brand? I see Bosal, Ansa, Dansk, Ernst and
Walker. All seem to be around $125-$150. What else will I need to replace
the cat and muffler? It looks like the muffler hangers cost as much as the
muffler.
Do list members still get a slight discount from Bus Depot?
Thanks.


-David ('87 Wolfsburg)



________________________________