Just for fun (not really, just working through things that might have something to do with the occasional bad running I mentioned a couple of weeks ago) I measured the fuel pressure at the test port ("T" connection). I got a value of (at idle, vacuum hose on/off) 32/38 psi. Bentley says it should be "approx. 29/36psi. I'm wondering if my readings are within acceptable range or are indeed too high? cheers alistair |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.