Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (July 2013, week 4)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Fri, 26 Jul 2013 22:16:23 -0400
Reply-To:     Dennis Haynes <d23haynes57@HOTMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Dennis Haynes <d23haynes57@HOTMAIL.COM>
Subject:      Re: exhaust leak,
              header tubes to collector on 2.1 engine-Exhaust sealants
Comments: To: Edward Maglott <emaglott3@GMAIL.COM>
In-Reply-To:  <51f317db.6934310a.747f.ffffdf81@mx.google.com>
Content-Type: text/plain; charset="US-ASCII"

You have to call them. They will sell to you over the phone.

Dennis

-----Original Message----- From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of Edward Maglott Sent: Friday, July 26, 2013 8:44 PM To: vanagon@GERRY.VANAGON.COM Subject: Re: exhaust leak, header tubes to collector on 2.1 engine-Exhaust sealants

Dennis, Where can an average Joe buy this in the 4oz can? Edward

At 11:18 PM 7/24/2013, Dennis Haynes wrote: >http://www.jrdindustries.com/id68.html > >I have recently discovered the JRD 7100, get the 4oz. can. This will >seal those exhaust flanges. Silicones and other types of sealants >should never be used on the exhaust unless the goal is an O2 sensor or Catalyst replacement. >Exhaust temps can get into that 1300f range (the pipes glowing red). If >you must use a sealant you need something to put up the fight. > > >Dennis > > >-----Original Message----- >From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf >Of Stephen Grisanti >Sent: Wednesday, July 24, 2013 3:00 PM >To: vanagon@GERRY.VANAGON.COM >Subject: Re: exhaust leak, header tubes to collector on 2.1 engine > >Same thing happened to me with an exhaust system from a different vendor. >Did not look quite lined up and leaked when I fired it up, so relied on >the extra gaskets and spray copper stuff to seal it up. I would have >much rather had a set that lined up perfectly but needed the van ready >for an upcoming vacation already planned. Sometimes you just have to make do. > >Stephen > > >________________________________ > From: David Beierl <dbeierl@ATTGLOBAL.NET> >To: vanagon@GERRY.VANAGON.COM >Sent: Wednesday, July 24, 2013 11:52 AM >Subject: Re: exhaust leak, header tubes to collector on 2.1 engine > > >At 11:26 AM 7/24/2013, OlRivrRat wrote: > > Why didn't you return them? > >By the time you get underneath and are trying to fit them up you tend >to have an awful lot invested in the status quo...my experience anyway. > >I got some 1.9l exhaust stuff from Bus Depot many years ago that needed >surgery. Come to think of it I rather believe it was Dansk. It was a >rush order, I was headed to Nova Scotia the next day, and I spent the >night doing whatever it was. I wasn't extra happy, and after the trip >I asked to swap them for proper ones. Ron wasn't particularly >receptive, and I understood -- he couldn't really give them back to >Dansk after I'd hacked on them. In a better world etc, but this is the >world we have. It certainly wouldn't have made sense to blow the trip >for this. > >Perhaps this is how we absorb some of the life-pain of people who have >to spend their lives welding flanges on the ends of odd-looking bent >tubes times infinity. > >Yours, >David


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.