Date: Sat, 27 Jul 2013 22:55:10 -0400
Reply-To: Larry Alofs <lalofs@GMAIL.COM>
Sender: Vanagon Mailing List <vanagon@gerry.vanagon.com>
From: Larry Alofs <lalofs@GMAIL.COM>
Subject: Re: afordable alternatives RE: Radiator fan resistor
In-Reply-To: <BAY179-DS22D1EF66DD644290220928A0540@phx.gbl>
Content-Type: text/plain; charset=ISO-8859-1
Dennis,
Why won't they burn out? How are they more capable or durable than the
original? Will they survive for 10 or 15 years behind the headlite?
I don't recall the exact resistances of the two sections of the original
resistor, but it seems to me they were quite different.
It's not obvious to me how to use two 1 ohm resistors.
Larry A.
On Sat, Jul 27, 2013 at 10:12 PM, Dennis Haynes <d23haynes57@hotmail.com>wrote:
> Let's not confuse the radiator fan with the heater or AC blower fan(s).
> Sure
> something else can be made to work. The best way to keep parts for older
> vehicles available is to buy them. Quality factory exhaust is no longer
> available because no one wanted to pay for them. Same for rear brake shoes,
> ball joints, engines, transmissions etc. So somehow enough purchased
> Eurovan
> radiator fans resistors that not only are they still available at the
> dealer
> they were improved. Dealer mufflers are no longer available which sucks
> now
> as I have a number of customers that have them and can't collect on the
> lifetime warranty! When they became $500 items back in 2008 it was fun to
> walk in with a bad one and a receipt and get the replacement. They also
> lasted a real long time.
>
> Basically one could be fabbed from a good electronics supply. For the late
> vans with AC 2 of these will do the job and these won't burn out!
>
> http://www.alliedelec.com/search/productdetail.aspx?SKU=70201862
>
> Dennis
>
>
>
>
> -----Original Message-----
> From: Project Pat [mailto:psdooley@verizon.net]
> Sent: Saturday, July 27, 2013 5:35 PM
> To: 'Dennis Haynes'; vanagon@GERRY.VANAGON.COM
> Subject: afordable alternatives RE: Radiator fan resistor
>
> These expensive NLA parts make me wonder how hard it would be to adapt
> something else.
> Example, just at random I looked up a blower resistor for a 95 F150. The
> quality Motorcraft brand is $21.
>
> http://www.partsgeek.com/catalog/1995/ford/f150/climate_control/blower_motor
> _resistor.html
> With the proper wiring harness plug($2 junkyard part), why couldn't
> something like this work?
>
> The resistance values and power dissipation should be in the ballpark with
> any other brand. It would just need to have the same number of stages for
> correct functionality. And of course the footprint would need to match the
> existing VW part. That really isn't hard to fix if the mounting hole in
> the
> airbox is accessible.
> Sure, call it a hack job, but it should work and the part isn't going
> obsolete on an F150 any time soon.
> If I needed a blower resistor in my Vanagon I would try it just for the
> knowledge.
> May even try this on my Rabbit pickup.
>
> Anybody know any reason it wouldn't work, discuss..
>
>
> -----Original Message-----
> From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of
> Dennis Haynes
> Sent: Friday, July 26, 2013 10:56 PM
> To: vanagon@GERRY.VANAGON.COM
> Subject: Radiator fan resistor
>
> Last week the fan resistor in Fun Bus failed on the way to see my son in
> the
> hospital. As many of us know the Vanagon resistor is no longer available
>
|