Date:         Mon, 29 Jul 2013 17:21:22 -0400
Reply-To:     Ed <email99@BELLSOUTH.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Ed <email99@BELLSOUTH.NET>
Subject:      Re: Blinking temperature light

I don't think this has been mentioned yet but the temperature light will
also flash if the concentration of antifreeze is grossly different from
specifications.  It will flash with 100% water or 100% antifreeze but I
don't know what the threshold alert percentages are for mixtures.

It will also flash if the two bare wire electrodes are dirty, greasy, or
corroded.  You might try sanding them with some fine grit paper and then
cleaning with solvent.

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.