Mig welder and some sheet metal. You also just screw or rivet a piece in place and seal the edges. Dennis, From my phone. ________________________________ From: JRodgers<mailto:jrodgers113@GMAIL.COM> Sent: 8/15/2013 3:54 PM To: vanagon@GERRY.VANAGON.COM<mailto:vanagon@GERRY.VANAGON.COM> Subject: Re: how is the gas pedal affixed? Related to this - the pedal attach point is a place where water accumulates - from rain, snow - what have you. it's a place to watch for rust. I didn't and now have a hole in the floor at that point. Any suggestions as to how to patch it it?? It's about 4"x6" and is in the floor an the tunnel a bit. I treated it so it would not rust further - but I need to patch it. Thanks, John On 8/15/2013 10:34 AM, Tom Carchrae wrote: > I was not having a good van day, and to top it off, when pulling out of the > gas station, the accelerator pedal didn't work. On inspection, the pedal > had come loose from the floor. > > The pedal looks like this: > > http://a248.e.akamai.net/origin-cdn.volusion.com/o42db.t5sus/v/vspfiles/photos/VWC-251-721-511-D-2.jpg > > On the floor, I found two metal pegs that poke into the two plastic holes > on the end of the gas pedal. However, I did not find anything else that > would fix the pedal down. > > I found this picture, indicating some kind of rivet > http://i105.photobucket.com/albums/m218/tencentlife/van%20tech%20items/DSC01057.jpg > > So, I guess I am looking for two large rivets? > > I'm curious to know why I didn't find any rivets under the carpet - > although there was a lot of crud under the carpet. Perhaps someone just > glued it in the past?... > > Tom > |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.