On Aug 21, 2013, at 12:11 PM, James Ogul <jimogul70@GMAIL.COM> wrote: How do you get the slider knobs off. I don't want to over force them. I pulling pretty hard. Do they ultimately slide off if I just pull harder? Trying to remove the face plate so I scan change out the heater fan switch. Have to get the knobs off to remove the plate. Jim 85 Westy. The "knobs" themselves, do not come off the slider mechanism. The slider mechanism separates about 1" from the knob, which is why using angled, needle nose pliers works well, as you grab the slider flat shaft behind the knob and pull, separating the slider flat shaft from where it's anchored. bob |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.