Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (August 2013, week 3)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Fri, 16 Aug 2013 15:32:16 -0400
Reply-To:     mkriley@FUSE.NET
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Mike Riley <mkriley@FUSE.NET>
Subject:      Re: Filling water tank when no hose is available (GoWesty
              connector)
Comments: To: jpalmer@mymts.net
In-Reply-To:  <COL125-W45BDD3679C36ECDA388494B8470@phx.gbl>
Content-Type: text/plain; charset=utf-8

the go westy tank fill only can be used with a hose with a special fitting on the end. there is no open hole to pour water in, poorly thought out mike

----- Original Message ----- From: jpalmer@mymts.net To: mkriley@FUSE.NET <mkriley@fuse.net>, Van Agon <vanagon@gerry.vanagon.com> Sent: Fri, 16 Aug 2013 15:05:09 -0400 (EDT) Subject: RE: Filling water tank when no hose is available (GoWesty connector)

I don't get it. Go Westy lists a tank fill and a city water hookup. I don't have these outlets but it sounds like the Tank Filler is what you want. Isn't it? Jeff85 Westfalia with original broken outlets

> Date: Fri, 16 Aug 2013 14:37:38 -0400 > From: mkriley@FUSE.NET > Subject: Re: Filling water tank when no hose is available (GoWesty connector) > To: vanagon@GERRY.VANAGON.COM > > kind of defeating the purpose of having a outside fill, eh? > lets see > 1 remove table > 2 remove crap from cuboard > 3 find scewdriver > 4 unscrew panel > 5 unscrew lid > 6 slop water everywhere tring to pour it in > 7 do 1 to 5 in reverse order > > much better > thanks > > > mike > > > ----- Original Message ----- > From: Stuart MacMillan <stuartmacm@gmail.com> > To: mkriley@FUSE.NET, vanagon@gerry.vanagon.com > Sent: Fri, 16 Aug 2013 11:56:26 -0400 (EDT) > Subject: Filling water tank when no hose is available (GoWesty connector) > > Fill it from the inside. Just remove the cover over the tank and unscrew the > 6” lid. I use a my 2 ½ gallon folding water jug. Much easier than using > the funnel I used to carry with the stock hook up. Use a little silicone > sealer on the gaskets. > > > > On Fri, Aug 16, 2013 at 7:56 AM, Mike Riley <mkriley@fuse.net> wrote: > > > Speaking of the GoWesty utility inlets they had some good ideas but missed > the boat! > > > How are you supposed to fill the tank when there is no pressure water > available? > > > More seriously they are using the same 2 cent foam gaskets that do all the > driver’s side seam damage! I was thinking of gearing up to make these in > silicon rubber of there is any interest. > > > mike > > > > Stuart > > ’85 Westy with the Go Westy hook ups. > > > -- > He that would make his own liberty secure, must guard even his enemy > from oppression; for if he violates this duty, he establishes a > precedent that will reach to himself. > Thomas Paine -- He that would make his own liberty secure, must guard even his enemy from oppression; for if he violates this duty, he establishes a precedent that will reach to himself. Thomas Paine


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.