Date:         Sat, 17 Aug 2013 15:23:10 -0700
Reply-To:     neil n <musomuso@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         neil n <musomuso@GMAIL.COM>
Subject:      Re: drum brake woes
Comments: To: Dan Barrett <dbx@pobox.com>
In-Reply-To:  <520FEEF5.5030904@pobox.com>
Content-Type: text/plain; charset=ISO-8859-1

did you bleed the brakes using the brake pedal? If so, and if the
master is old.....

I've read that a master cylinder can fail if one repeatedly pushed the
pedal to the floor to bleed the brakes (dirt rubs on the seal(s) and
ruins them).  IF it's failed, it may have failed on one circuit only.
This would leave you with some "pedal".

Likely though, as Tom suggests, it's likely the shoe adjustment. Also,
are you certain that the adjuster et al is installed correctly?


Neil.



On Sat, Aug 17, 2013 at 2:45 PM, Dan Barrett <dbx@pobox.com> wrote:


> I've replaced my brake lines and installed new drums, shoes, cylinders,
> and hardware on my rear brakes.  The hydraulic system is bled and there
> are no fluid leaks.  But, the brake pedal goes almost all the way to the
> floor with the engine on.  Pumping the brakes does not change the
> situation, so I'm taking that as a sign that the hydraulic system is
> functioning as it should and the problem lies in the rear brake adjustment.




--
Neil n

Blog: tubaneil.blogspot.ca

'88 Westy http://tinyurl.com/c8rlw6p

'81 VanaJetta 2.0 "Jaco"  http://tubaneil.googlepages.com/

Vanagon VAG Gas inline-VR Engine Swap Group:

http://tinyurl.com/d7gd5ej