At 01:20 PM 8/24/2013, David M wrote: >Ok, I finally got the clips out (TWO identical ones). No-one ever >mentioned two clips! Used a 2" long screwdriver. I would imagine >reinstalling the clips will be a pain because I have no idea where >the second one goes. Sounds as though the person installing the sender didn't have an O-ring the right thickness, or else that the thermostat housing is damaged. Time to get eyeballs on the thermostat housing maybe? I'd get some PB-Blaster onto the bolts in case it needs removing, they've been known to break on removal. And a new thermostat housing wouldn't be amiss at this age regardless, it's 25 years old now. As I recall the proper O-ring is quite fat. I *think* it should be doing its sealing against the wall of the cavity rather than by pressure from the clip against the bottom. Yours, David |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.