Date:         Sat, 31 Aug 2013 11:09:48 -0700
Reply-To:     David M <covrambles@YAHOO.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         David M <covrambles@YAHOO.COM>
Subject:      Replacement of coolant temp sensor (help needed)
In-Reply-To:  <13CD8A70-0822-4EBF-B541-F45EBB06BB49@gmail.com>
Content-Type: text/plain; charset=us-ascii

I'm trying to replace the coolant temp sensor (temp gauge sensor - black connector) in my van.
By that I mean reinstall the original sensor which popped out when I inadvertently removed the clip.

I pushed the unit back in the hole and reinstalled the clip but then I noticed it had a lot of wiggle and I was easily able to pull it out. What is going on here? Looking at the unit I see no groove for the clip to catch on to.
Either I am missing some part that fell off or I am doing something wrong. The only thing I can think of is the o-ring must not be pushed all the way back and the clip holds between the unit and the o-ring. But I don't see how this would prevent the unit coming off? The other possibility is the coolant temp sensor and temp II sensor clips are not interchangeable and I got them mixed up (they looked the same to me).

I hope someone can answer soon as I wanted to get this done this morning and refill the coolant before it hits 100 degrees here in AZ.


David (1987 Wolfsbug, currently coolant-less)



________________________________