Date:         Sat, 7 Sep 2013 12:50:52 -0400
Reply-To:     Bob MacDowell <yakandhike@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Bob MacDowell <yakandhike@GMAIL.COM>
Subject:      Top off the rad
Content-Type: text/plain; charset=ISO-8859-1

In my opinion, its much easier to take the bleader bolt out of the rad.
Then put your gal. of antifreeze between the mirror and the side window.
Then get a piece of plastic tubing that fits in the bleeder bolt hole.
Next, suck on the hose to get the fluid running and stick it in the bleeder
hole. Let it go until fluid starts coming out of the bleeder hole and your
done. All this parking on the side of a Mt. And different kinds of rube
goldburges is just nonsence. Fill it up thru this vent, start the van up
and go. Yes, its that easy

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.