if it's a Rocker Arm Assembly for a 1.9 wbxr engine you are after, I have many. Not sure what a 'carrier' is. I have dozens of spare push rod tube sealsas well, and push rod tubes
On 9/8/2013 6:17 PM, MICHAEL H wrote: > some weeks ago I threatened to replace a spent pushrod tube seal. that stopped the seepage til yesterday - full blown leak. when I started to loosen the nut for the # 3 valves, a piece of the carrier came away. all four break points indicate long term oil staining. Van has been only a little off all summer for weak oil pressure from incorrect seal. when the tube was replaced ( IDK how long before me) an outer seal was used inboard. new seals are in appropriately - tube no longer wobbles in place. did the valves per Bentley - shaft carrier held in place with extra washer temporarily per Samba thread post. so, as the subject lines reads, I'm in search of a carrier for an `85 1.9. willing to buy entire shaft if necessary. reply here and show your support or PM me and be an off-season Secret Santa. thanks in advance - now, back to your regular programming ... =(:|) mike > |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.