Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (September 2013, week 2)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Thu, 12 Sep 2013 09:46:14 -0500
Reply-To:     ralph meyermann <ralphmeyermann@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         ralph meyermann <ralphmeyermann@GMAIL.COM>
Subject:      Re: Luggage Rack underside -- washers and felt pads
Comments: To: Harold Teer <teer.vanagon@gmail.com>
In-Reply-To:  <CAGwfHKR0Hw57EGh1GXH2GS+yDjUKc9UC+Ay_EapayQyNrApw8A@mail.gmail.com>
Content-Type: text/plain; charset=ISO-8859-1

I took off my luggage rack to replace the seals and found the same issue, I made some rubber washers for the front which apparently reduced how tight the front sealed to the body and made it start flapping about 35 mph, very annoying sound/vibration!!

Velma 82 1.9L AAZ td westy On Sep 12, 2013 9:30 AM, "Harold Teer" <teer.vanagon@gmail.com> wrote:

> A few question for those of you who have removed and replaced the luggage > rack. > > Yesterday, I removed the luggage rack from my 1991 Westy for the first > time. I have owned this van since 1995 and have all of the previous owners > maintenance receipts, and do not believe the luggage rack has ever been > removed. However, it could have been for some unknown reason by the > previous owner. > > My questions concern the washers and felt pieces > > There was a rubber washer on each roof side bracket (passenger side and > driver side) but no washer on the front roof brackets---is that normal or > should I add them to the front? My thought is that the lack of washers was > more of a fit issue by the original installer. > > There are two 2"x2" felt type pads at the back of the rack on the passenger > side and driver side. There appears to be glue/felt residue on the inside > back of the rack. Have you seen a felt type pad at that location? > > There are two small rubber pads on each side at the far back. These are > fine. > > According to Bentley, there are two rubber washers at each of the 4 back > bolts. What I have is a rubber washer, a steel washer, and a nut. Is that > normal on later model Westy's? > > Thanks for any advice, > > Harold > > > Harold Teer > 1991 Westy -- VANGAUX > Harrisonburg, VA >


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.