On Tue, Sep 17, 2013 at 7:35 PM, Timmy Evens <monkey_lips@yahoo.com> wrote: > what brand/model charge controllers do folks recommend? ease of > installation? cost? > > thanks, > tim
I tried a couple cheap controllers and they all had poor voltage regulation. This will decrease the life of the battery. I ended up with a Morningstar Sunsaver MPPT, I got mine for $200. Very happy with it. http://www.morningstarcorp.com/en/sunsavermppt Out of the box the voltages can be configured to charge a few different battery types, or with a special cable it can be programmed via computer to anything you want. It also has an optional remote battery temperature sensor which I would recommend using. I have seen over 20 F difference with the battery in the stock battery box; they recommend using the sensor at 5 F difference or above. This also extends the life of the battery. Ryan |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.