I would just use bolts as is done on one side. With bolts in place of studs, if you need to pull a head you can without removing a pipe. M8 X 25 or M8 X 30 will work. From Westys at rainy Watkins Dennis -----Original Message----- From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of TonyCollins Sent: Friday, September 20, 2013 1:18 PM To: vanagon@GERRY.VANAGON.COM Subject: Help with replacement exhaust studs Ok in need the powers if cross reference. Say I needed to get exhaust studs for a 1985 vanagon and the friendly flaps counter person had a pea brain that did not function with out their parts catalog because they do not speak metric. Which modern car would you tell them to look up to get a m8 1.25 pitch X 40-50mm exhaust stud? Please refrain from directing me to our fabulous vendors. It could be to late for that :) Thanks Sent from my iPhone |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.