Date:         Sat, 21 Sep 2013 16:54:08 -0400
Reply-To:     Dennis Haynes <d23haynes57@HOTMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Dennis Haynes <d23haynes57@HOTMAIL.COM>
Subject:      Re: Help with replacement exhaust studs
Comments: To: TonyCollins <tonycollin@GMAIL.COM>
In-Reply-To:  <F354799E-1671-49C1-B2F4-2F47A8A3FE1C@gmail.com>
Content-Type: text/plain; charset="US-ASCII"

I would just use bolts as is done on one side. With bolts in place of studs,
if you need to pull a head you can without removing a pipe. M8 X 25 or M8 X
30 will work.

From Westys at rainy Watkins
Dennis

-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of
TonyCollins
Sent: Friday, September 20, 2013 1:18 PM
To: vanagon@GERRY.VANAGON.COM
Subject: Help with replacement exhaust studs

Ok in need the powers if cross reference.

Say I needed to get exhaust studs for a  1985 vanagon and the friendly flaps
counter person had a pea brain that did not function with out their parts
catalog because they do not speak metric.

Which modern car would you tell them to look up to get a m8 1.25 pitch X
40-50mm exhaust stud?

Please refrain from directing me to our fabulous vendors. It could be to
late for that :)

Thanks

Sent from my iPhone