I did a write up when I replaced the Hall on my 1985 1.9L here: http://www.thesamba.com/vw/forum/viewtopic.php?t=524320&highlight= I don't know what the difference would be for a 2.1 but it is a different part number. On the post, Windnsea replied that I did not have to remove the distributor to replace the Hall, but did not provide any details. Even if it were possible, with so many tiny screws that have to be removed I'd surely drop at least one in an inaccessible place.
On Tue, Oct 1, 2013 at 8:06 AM, Jim Felder <jim.felder@gmail.com> wrote: > John, > > If I recall, pop the distributor cap, remove the rotor and plate and lift > the sensor out of its slot. Unplug the other end and plug the new one in > like that one came out. There may be a little more to it than that but not > much. > > Jim > > > On Tue, Oct 1, 2013 at 6:04 AM, JRodgers <jrodgers113@gmail.com> wrote: > > > How difficult is it to change out the hall sending unit. Mine is shot, > > apparently. What has to be done? > > > > Thanks, > > > > John > > > |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.