Work fast! Seriously, clamp hose, remove from pump and place new hose on pump. Cut to length. With clamp in place on new hose quickly remove old and new one connected quickly. Have a bucket to catch what pours out. I loose than a quart. Dennis -----Original Message----- From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of JRodgers Sent: Friday, October 11, 2013 6:54 PM To: vanagon@GERRY.VANAGON.COM Subject: Tips and Tricks Request - Change fuel hose from tank to pump Now I have the hose - next question. How would one go about replacing that hose with fuel in the tank?? Can't clamp the hose - it has to come off. Figure there must be a procedure to get this change done and not make a complete firebomb waiting to be lit! Thanks, John |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.