Date:         Fri, 18 Oct 2013 00:38:33 -0400
Reply-To:     Dennis Haynes <d23haynes57@HOTMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Dennis Haynes <d23haynes57@HOTMAIL.COM>
Subject:      Re: off with her heads
In-Reply-To:  <52606AFD.3020702@turbovans.com>
Content-Type: text/plain; charset="US-ASCII"

Pull the head, cylinder(s) and all. Some raps on the side with a dead blow
hammer will get the cylinders out. Then you can clean them properly and lap
them into the heads to get a good surface on both the liners and heads. Yes
you will have to deal with the rings. It can be done even with the engine in
the van.

Dennis

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.