Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (October 2013, week 3)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Mon, 21 Oct 2013 11:18:24 -0700
Reply-To:     Dick Wong <sailingfc@DSLEXTREME.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Dick Wong <sailingfc@DSLEXTREME.COM>
Subject:      Re: Wiring color question
Comments: To: Dennis Haynes <d23haynes57@hotmail.com>
In-Reply-To:  <BAY179-DS276B202B8342E545D6A435A0010@phx.gbl>
Content-Type: text/plain; charset=ISO-8859-1

Roger Wilco.

Thanks Dennis.

On Mon, Oct 21, 2013 at 11:12 AM, Dennis Haynes <d23haynes57@hotmail.com>wrote:

> Almost everything the ECM does is by controlling or measuring something to > the chassis. In the control world this is known as sinking logic, as > compared to sourcing logic where that work is done on the positive side. > For > example the injectors get feed battery voltage and the ECU completes the > circuit to the chassis to open them. The temp sensors complete the circuit > to ground from the ECU. Follow the wiring diagram and stick with it. > > Dennis > > > -----Original Message----- > From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of > Dick Wong > Sent: Monday, October 21, 2013 1:56 PM > To: vanagon@GERRY.VANAGON.COM > Subject: Re: Wiring color question > > I noticed that there are brown/white wires going into the ECM. So those > are > only grounded when the ECM is "on" or ECM programming switches it to > ground? > What if I connected the brown/white wire directly to a ground lug on the > chassis? > > Thanks. > > > On Mon, Oct 21, 2013 at 10:45 AM, Neil N <musomuso@gmail.com> wrote: > > > brown/white is for switched grounds? (i.e. for dome light) > > > > If the gauge is the same, if one is used in place of the other, maybe > > the only issue is slight confusion for someone else trouble shooting > > that wiring? > > > > > > > > On Sun, Oct 20, 2013 at 11:59 PM, Dick Wong > <sailingfc@dslextreme.com>wrote: > > > >> > >> What is the functional difference between the Brown ground wire and > >> the Brown/White wire? What if I use the Brown/White circuit instead > >> of just Brown (direct ground)? > >> > >> > > > > -- > > Neil n > > > > Blog: tubaneil.blogspot.ca > > > > '88 Westy http://tinyurl.com/c8rlw6p > > > > '81 VanaJetta 2.0 "Jaco" http://tubaneil.googlepages.com/ > > > > Vanagon VAG *Gas* inline-VR Engine Swap Group: > > > > http://tinyurl.com/d7gd5ej > > > >


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.