Date: Tue, 22 Oct 2013 16:57:08 -0500
Reply-To: ralph meyermann <ralphmeyermann@GMAIL.COM>
Sender: Vanagon Mailing List <vanagon@gerry.vanagon.com>
From: ralph meyermann <ralphmeyermann@GMAIL.COM>
Subject: Re: 5 speeds, was: Noisy transaxle??
In-Reply-To: <5266F195.4030809@turbovans.com>
Content-Type: text/plain; charset=ISO-8859-1
Hmm? 2 " moving the engine back could make the throttle cable and coolant
lines an issue? A bit of cutting/sectioning/welding for the trans mount to
move forward shouldn't be that hard. I ave done plenty of sheet metal work
building dirt late model bodies and other components.
Velma 82 1.9L AAZ td westy
On Oct 22, 2013 4:43 PM, "Scott Daniel" <scottdaniel@turbovans.com> wrote:
> That's not hard at all Ralph ..
> well, depending on what you mean by 'hard .'
>
> You might be able to do it without removing the gas tank ...
> and really ..since you have a guide bushing in a metal tab above your gas
> tank that you won't be using ..
> the right way involves removing the gas tank.
> and dealing with engine mounting location and bars.
>
> the 5 speed being two inches longer puts the engine two inches further aft
> , VW's solution.
> Mine was to move the front trans mount forward in the body two inches..
> but it was a lot of work the way I did it. Worked out really nice though.
>
> Scott
>
> On 10/22/2013 2:15 PM, ralph meyermann wrote:
>
> Think I can handle that pattern, now the hard part of bolting it in and the
> connection of the shift linkage.
>
> Velma 82 1.9L AAZ td westy
> On Oct 22, 2013 4:08 PM, "Jim Felder" <jim.felder@gmail.com> <jim.felder@gmail.com> wrote:
>
>
> The layout for a factory five-speed is all the way left and forward,
> reverse. All the way left and back, first. Forward in the middle slot,
> second. Pull back into third. Forward to the right is fourth, and you pull
> back into fifth. Fourth and fifth on all but your very steepest hills,
> that's what you get with a five speed. There is no pushing down to engage
> any gears, just click click click. Mine was rebuilt 100K miles ago and
> shifts very smoothly and precisely.
>
> Jim
>
>
> On Tue, Oct 22, 2013 at 4:00 PM, ralph meyermann <ralphmeyermann@gmail.com
>
> wrote:
>
> so instead of pushing down left and forward for reverse, it would be down
> left then back ? I could handle that, Velma is primarily a road
> trip/camping vehicle. This is my first VW and not informed on the various
> shift patterns.
>
> Velma 82 1.9L AAZ td westy
> On Oct 22, 2013 3:02 PM, "mark drillock" <mdrillock@cox.net> <mdrillock@cox.net> wrote:
>
>
> There is no way to make 4 gears as useful as 5 for a non-tdi diesel.
> Spreading out 4 gears to cover the same range as 5 leaves gaps that the
> weaker engine can't deal with.
>
> You don't need to go down before left if you have the original 5 speed
> shifter. If you use the 4 speed shifter then the reverse lockout guide
> blocks 1st so you have to go down before you go left and back.
>
> Mark
>
> Stacy Schneider wrote:
>
>
> First is like going in to reverse on a classic beetle every time
> you come away from a stop sign .
> Of course this is my opinion . Some people may just shift around
> it and put the wear on their clutch instead .
> Sure it may give you a spread in shifting . But so will a well
> built. 4 speed and none of the dreaded down and left every time you
>
> stop .
>
> My. 914/6 had the same set up ,except you didn't have to push
> down to get in gear and I didn't 't care for it either. .
> I grew up driving and stick and have never owned any thing
>
> else
>
> . In my opinion 1st gear belongs up and left . Add as many gears on
>
> the
>
> end , I am fine as well . But left and down for 1 st ,no thanks .
>
> Stacy
> Vanagonsplus.com
>
>
>
>
>
|