Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (October 2013, week 4)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Mon, 28 Oct 2013 14:10:38 -0700
Reply-To:     Stuart MacMillan <stuartmacm@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Stuart MacMillan <stuartmacm@GMAIL.COM>
Subject:      Re: EV top on Vanagon?
In-Reply-To:  <1382895169.35575.YahooMailNeo@web164605.mail.gq1.yahoo.com>
Content-Type: text/plain; charset="iso-8859-1"

That's pretty cool what that guy on the Samba did to lengthen his pop top!

Keep in mind the EV Westfalia is a Weekender that is much shorter than the EVC, which is a Winnebago designed top.

It's not worth the trouble IMHO. There is much more curve in the Vanagon sheet metal top, and the EVC is made completely open from the front seats to the rear with a flat panel across it.

Stuart

-----Original Message----- From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of Stephen Grisanti Sent: Sunday, October 27, 2013 10:33 AM To: vanagon@GERRY.VANAGON.COM Subject: Re: EV top on Vanagon?

This Samba thread says No, but that does not mean it hasn't been done by someone, somehow, somewhere.  Good luck if you find one to try.  There was one in a junkyard near me for years but it is now gone and the yard closed.  Body was a rusted mess but the jumpseat interior and the low-profile poptop were nearly perfect.  I think the guy was dreaming to ask $2k for a junked vehicle, but that was the price he mentioned and he would NOT part it out.

http://www.thesamba.com/vw/forum/viewtopic.php?t=485434&highlight=eurovan+po ptop

Stephen

On Sunday, October 27, 2013 10:41 AM, Don Hanson <dhanson928@GMAIL.COM> wrote: anybody ever try to put a EV Westfalia top on a Vanagon?  I was next to a buddie's EV weekender, I guess you'd call it, and that top looked like it might go onto a Vanagon.  Those tops are a lot less protruding than a Vanagon Westie top...I never even noticed it WAS a pop top till I looked closely.  If that kinda top could be adapted to my Tin Top I would be very interested, maybe I'd be able to dredge one out of a wrecking yard somewhere and stick it on for the headroom.

  I live and drive in such a windy place that the Westie top, with it's aerodynamic 'baggage', I'd be 'paying' for the added headroom of one every time I daily-drive.  I've seen the list posts from others who've driven the Columbia River Gorge (where I live) and had issues with their Westies and the winds.  40+ mph is not considered especially windy and 70+ are frequent on a 'regular' day... With prevailing winds like these, you want your 'rig' to be as low profile as possible.

  I realize there'd probably be some adjustments needed to make the fit, but I was curious if anyone has found the rough dimensions to be workable for a possible Vanagon conversion.  The EV Westfalia tops are very slick.


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.