RE: Propex Install THE EXHAUST MUST BE TO THE OUTSIDE!! And so should the intake for the combustion. The large outlet pipe (where the heat comes out) can be anywhere the Propex is and the box of the Propex should have free air flowing to it to be heated. And the intake for the combustion is usually taken from the outside also. If you were to place the exhaust inside you would die! BTW, you might look at the idea of mounting the Propex in the bottom of the small cupboard at the floor next to the rear seat. Or go to the right side under the rear seat. |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.