Date:         Fri, 8 Nov 2013 09:10:07 -0800
Reply-To:     Tom Carchrae <tom@CARCHRAE.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Tom Carchrae <tom@CARCHRAE.NET>
Subject:      machine shop recommendations (vancouver)
Comments: To: Stuart MacMillan <stuartmacm@gmail.com>
Content-Type: text/plain; charset=ISO-8859-1

On Fri, Nov 8, 2013 at 8:58 AM, Stuart MacMillan <stuartmacm@gmail.com>
 wrote:

> Take that thermostat housing to a machine shop with a hot tank and soak
> it.  That should clean it up even if it is epoxy, and have them remove the
> broken bolts.
>

Thanks Stuart.  That is a very sensible suggestion - especially the bolts
part.

Vancouver persons; do you have any recommendations of shops that would do
this?  Otherwise, I'll try yellow pages.

Thanks all,

Tom

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.