Date:         Tue, 12 Nov 2013 19:36:35 -0800
Reply-To:     Neil N <musomuso@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Neil N <musomuso@GMAIL.COM>
Subject:      Re: Arduino and Vanagons
Comments: To: JRodgers <jrodgers113@gmail.com>
In-Reply-To:  <5282E439.6090709@gmail.com>
Content-Type: text/plain; charset=UTF-8

Interesting website: http://arduino.cc/

I'm sure I know less of this than you John but....

It has a section on Hall sensors:

http://playground.arduino.cc//Main/InterfacingWithHardware#Magnetic_Hall

My Digifant pro manual shows that the IS unit uses input from the
distributor hall.

My guess is that PS and AC switch inputs should be "simple" enough for
the right person.  (read: not me  ;)

Would arduino interface properly with the connection to pin 1 of Digifant ECU?

Neil.

On 11/12/13, JRodgers <jrodgers113@gmail.com> wrote:


> ...... The second - and most
> important thing - would be to develop a digital replacement box for the
> Analog box that controls the Idle Stablizer System in the Vanagon.
> That's the box just forward of the right hand stop light in the Vanagon.
> Those things are expensive - and becoming more and more scarce.


--
Neil n

Blog: tubaneil.blogspot.ca

'88 Westy http://tinyurl.com/c8rlw6p

'81 VanaJetta 2.0 "Jaco"  http://tubaneil.googlepages.com/

Vanagon VAG *Gas* inline-VR Engine Swap Group:

http://tinyurl.com/d7gd5ej