Date:         Sat, 9 Nov 2013 16:20:29 -0500
Reply-To:     Larry Alofs <lalofs@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Larry Alofs <lalofs@GMAIL.COM>
Subject:      Re: Cool Tool for Rusty Nuts, etc.
In-Reply-To:  <527e8f12.29e0440a.0ecc.0cb8@mx.google.com>
Content-Type: text/plain; charset=ISO-8859-1

I am stunned that I never thought of this idea.  It's the same principle as
inductive stove tops.  It is also used industrially to heat large slabs of
steel.
  Being an old Dutchman on a fixed income, I don't want to spend the money,
but I will be experimenting with a coil of wire attached to my AC arc
welder.

Larry A.



On Sat, Nov 9, 2013 at 2:37 PM, Jeff Schwaia <vw.doka@gmail.com> wrote:

> $500 on Amazon.  More from the Snap-On truck!
>
> Cheers,
>
> Jeff
>
>
> -----Original Message-----
> From: Stuart MacMillan [mailto:stuartmacm@gmail.com]
> Sent: Saturday, November 09, 2013 11:08 AM
> To: 'Jeff Schwaia'; vanagon@GERRY.VANAGON.COM
> Subject: RE: Cool Tool for Rusty Nuts, etc.
>
> Nice for VW exhaust nuts!  How much?  I know, if you have to ask . . .
>
> Stuart
>
> ----Original Message-----
> From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of
> Jeff Schwaia
> Sent: Saturday, November 09, 2013 10:52 AM
> To: vanagon@GERRY.VANAGON.COM
> Subject: Cool Tool for Rusty Nuts, etc.
>
> My Snap-On man just gave me a demo of this inductive heating tool for
> loosening frozen nuts.  Pretty cool (hot?).
>
> http://www.theinductor.com/index.php?m=50&s=24
>
>
> Cheers,
>
> Jeff
>