When I added my second tank on the right hand side. I found the two plastic screws did not want to come out. They were then drilled and picked out. Once they were out of the way I thought that it would be a simple task of screwing in the two new bolts. It wasn't to be, the threaded hole was off center and the bolt could not be screwed in. I had to grind down some of the floor around the bolt hole to finally get the bolt theaded thru. Once that was done the tank attached no problem and lined up perfectly!! |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.