Date:         Sun, 15 Dec 2013 06:23:43 -0500
Reply-To:     Tim Whynot <timwhy@MSN.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Tim Whynot <timwhy@MSN.COM>
Subject:      Re: Propane

When I added my second tank on the right hand side. I found the two
plastic screws did not want to come out. They were then drilled and picked
out. Once they were out of the way I thought that it would be a simple
task of screwing in the two new bolts. It wasn't to be, the threaded hole
was off center and the bolt could not be screwed in. I had to grind down
some of the floor around the bolt hole to finally get the bolt theaded
thru. Once that was done the tank attached no problem and lined up
perfectly!!

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.