If it preheated the oil to 35f on a 0f morning it would be worth it if you are in an area where 0f mornings are not unusual. Rob vwrobb@gmail.com
At 12/23/2013 02:22 PM, Vanagon wrote: >That block heater. I read that it puts out 250w - anyone have an >estimate or actually measure how much temperature rise this would >create in in the oil? If it preheated the oil to 100F on a 0F >morning, then the $100 price tag could be justified, sure. But a 10 >degree rise probably wouldn't be worth it. > >Sent from my 1963 maroon and cream 702B Western Electric Princess phone. > > > On Dec 23, 2013, at 10:16 AM, Ian Allan <ian.allan@BMTS.COM> wrote: > > > > In Canada NAPA has an oil pan heater obviously made for the WBX > as it bolts on perfectly to existing fastener locations. > Manufactured by Pyroil NAPA part number 6051500. It is a 250 watt > heater with a 36" cord. Uses two existing fasteners. > > > > http://partimages2.genpt.com/partimages/255470.jpg > > > > Works very well. > > |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.