Date: Tue, 24 Dec 2013 14:12:44 -0600
Reply-To: jpalmer@MYMTS.NET
Sender: Vanagon Mailing List <vanagon@gerry.vanagon.com>
From: Jeff Palmer <jpalmer@MYMTS.NET>
Subject: Re: Engine woes - what to do?
In-Reply-To: <CAFnDXk2H3_uCZ=FuYJ0dHyTb_VgKZGENT+LMh9Cozn=Ru7XVmg@mail.gmail.com>
Content-Type: text/plain; charset="iso-8859-1"
Or reasons to swap :)
> Date: Tue, 24 Dec 2013 14:07:40 -0600
> From: jim.felder@GMAIL.COM
> Subject: Re: Engine woes - what to do?
> To: vanagon@GERRY.VANAGON.COM
>
> Does anyone know of a car that has more engine swap possibilities than a
> Vanagon?
>
> Jim
>
>
> On Tue, Dec 24, 2013 at 6:28 AM, Jack R <jack007@comcast.net> wrote:
>
> > I know a couple volks who are very pleased with their Bostig conversion.
> > http://www.bostig.com/
> >
> > In my case, I came very close to putting in a 2.5l 5 cly TDI (owned the
> > motor, and was ready to proceed), but the cost to beef up the trans due to
> > the torque of a diesel among many other things, resulted in converting my
> > 84
> > Wolfie to a 2.1L out of a 91 in tip top shape. Very pleased in all. As I
> > use my Westie for a few weekends of Michigan Camping, and put about 5,000
> > miles on it a year, the ROI from the costly conversion to get more MPG or
> > performance is not there for me.
> >
> > Each conversion is a unique decision, and Scott makes some valid points on
> > your current situation.
> >
> > Good luck with whatever you do... I'll speak for everyone on this list, we
> > ALL hate to see any Vanagon leave circulation!!
> >
> > Jack R.
> > 84 Westy Wolfie with a 2.1L (owned since 87, and restored to original
> > splendor)
> >
> > -----Original Message-----
> > From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of
> > Scott Daniel
> > Sent: Tuesday, December 24, 2013 7:14 AM
> > To: vanagon@GERRY.VANAGON.COM
> > Subject: Re: Engine woes - what to do?
> >
> > I'll have to second this. Inline 4 gasser didn't pop into my mind as a
> > solution out of the poster's current delema ..
> > but yeah ..
> > simple , cheap, durable, easily repalced, all VW , good fuel economy,
> > decent
> > power ..
> > there is a lot to like in a VW-based I4 gasser conversion.
> >
> > ...if I ever find time to my to play with my 3 actually.... ..mutter
> > mutter.
> >
> >
> > On 12/23/2013 4:07 PM, Don Hanson wrote:
> > > I'll chime in for the inline VW swap as probably the simplest and most
> > > economical way to go. Like Jim, I really like the power, the fuel
> > > economy and the overall simplicity of having a VW motor on VW parts in
> > > my VW van. I did keep the Digifant 1.8 liter head and all the wires
> > > do plug right in, pretty much. It bolts right in using VW diesel
> > > parts that are available and proven...the diesel VW engine is the same
> > > block as the gasser, so all the parts for mounting it are factory
> > > stock. ABA blocks are also identical. My motor cost me about $600
> > > to build from a $300 Jetta ABA and I sold off the extra parts to
> > > almost make a profit.
> > > You can find almost unlimited inline VW motors for under $500 all
> > > over everywhere. The only downside is there is no one source of
> > > information on this particular swap, not that it needs a lot of
> > > explaining. Inline parts are dirt cheap, they are simple to work on
> > > and quite robust. I was a VW rookie when I got mine already
> > > converted, but the fellow who did the conversion was a carpenter and
> > > not a mechanic. I've since done a lot of swapping around and messing
> > > with it, mainly to learn and because they are so cheap and
> > > simple....They are easy to mess with....I never HAD to work on mine
> > > much, but I chose to go to the ABA 2.0 liter block after reading about
> > > it and finding one for $300...Took me 2 days, about to swap all the
> > > stuff over and re-install it into my van. I have a spare motor now,
> > > too...should I ever need one.
> > >
> > > On Mon, Dec 23, 2013 at 1:09 PM, Todd Last <rubatoguy@comcast.net>
> > wrote:
> > >> After almost 230,00 miles my '88 Vanagon is displaying symptoms of a
> > head
> > leak - I have not yet confirmed this or done a recent compression test, but
> > plan to do so. I have concluded that one of the worst things you can do to
> > your van is not use it. Bad things happen when they are left sitting!
> > >> In any case I am looking at my options, and started out thinking about
> > replacing the heads, then thought if I was going to do that, I might as
> > well
> > put in new piston rings too, and well, once you do that you might as well
> > go
> > a step farther and do an engine rebuild. Of course, once you get there,
> > the
> > question becomes, stock, modified (like GoWesty) or engine swap. In
> > looking
> > at these options, it looks like a cost of $5,000 or more. From what I have
> > seen, Subaru conversions can reach over $10K. Yikes!
> > >>
> > >> I was wondering if I could get opinions on the best course of action in
> > this situation, not wanting to spend tens of thousands of dollars. Would
> > list memebers give me their 2 cents worth and if possible, what the
> > aproximate costs for the various solutions range from? I'm not sure if it
> > makes more sence to just install new heads and hope for the best, or go
> > full
> > bore and swap the engine.
> > >>
> > >> What does the voice of experience say? Anyone out there have opinions on
> > the GoWesty performance engines vs. a Subaru transplant?
> > >>
> > >> Thanks,
> > >> Todd
> > >> '88 Westy
> > >>
> >
|