Pull. Twist a flat screwdriver and it should pop off. Put a rag over it to prevent it's visiting the next county. Be sure you get put the old o-ring. You won't lose much coolant if the engine's cold and you're fairly quick. Karl Wolz Sent from my electronic umbilicus > On Dec 29, 2013, at 11:38 AM, JRodgers <jrodgers113@GMAIL.COM> wrote: > > I need to release the Temp II sensor. > > Question: Does one push the release clip - or pull the release clip - to > unlock and free the connector. > > Having a problem getting it loose and it's hard to see the action from > on top. > > Getting underneath to look isn't an option for the time being. It's been > raining and water is running under the van. > > Thanks, > > John |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.